To
order a free catalog | Click
here |
To buy AMSOIL
products, visit the AMSOIL
Online Store
|
Buy AMSOIL at wholesale prices |
Register
to receive valuable WHOLESALE PRICING information and AMSOIL
product updates by email
|
AMSOIL By-Pass Oil Filters
AMSOIL EaBP Filters are high
efficiency by-pass filters that also remove soot.
Three EaBP Filter
Sizes Include:
EaBP90
EaBP100
EaBP110
|
In an effort to continually enhance
the AMSOIL product line, new technologies are evaluated to
provide the best products for AMSOIL Dealers and customers.
Consequently, AMSOIL is now offering new by-pass filters from
its revolutionary Ea line of filtration products. AMSOIL EaBP
Filters are high efficiency by-pass filters that also remove
soot. AMSOIL EaBP Filters are superior to AMSOIL BE by-pass
Filters in several key areas.
Higher Efficiency
AMSOIL EaBP Filters have an efficiency
of 98.7 percent at two microns, compared to the AMSOIL BE
Filters’ 98.6 percent efficiency at three microns. At
normal operating RPMs the EaBP Filter will filter all of the
oil in a typical five quart sump in less than 10 minutes.
Superior Construction
The superior construction of AMSOIL
EaBP Filters provides better sealing and increased longevity
along with superior corrosion resistance. AMSOIL EaBP Filters
have a marine powder coated exterior. Their zinc-dichromate
base plates increase rust protection, and they feature the
same dimensions and threads as BE-90, BE-100 and BE-110, so
they are compatible with existing AMSOIL by-pass filter mounts.
EaBP Filters have a nitrile HNBR gasket and an orange silicone
anti-drain valve. The two stage pleated and layered cellulose/full
synthetic media has an efficiency rating of 98.7 percent at
two microns.
Longer Lasting
When used in conjunction with AMSOIL
motor oil and an AMSOIL EaO or Donaldson Endurance™
filter, the EaBP should be changed every other full-flow filter
change up to 60,000 miles. When used with other brands of
motor oil or full-flow filters, the EaBP filter should be
changed every other full-flow filter change. AMSOIL recommends
using oil analysis when extending oil drain intervals.
Increased Oil Capacity
The increased fluid system capacity
and filtration life provides improved oil cooling and ensures
that equipment constantly runs on clean oil. Engine efficiency
is increased and engine life is extended significantly.
Soot Removal
AMSOIL has designed a new high-efficiency
by-pass filter element that is also a soot removal device.
AMSOIL Ea by-pass Filters use a synthetic/cellulose sandwiched
media. The inner layer of the element is composed of a highly
efficient cellulose media covered with a full synthetic media
outer layer. These filters remove 39 percent of soot contaminants
less than one micron. Soot removal efficiency increases approximately
10 to 14 percent when the EaBP Filter is used in conjunction
with a standard full-flow filter, even higher in conjunction
with Ea Oil Filters or Donaldson Endurance filters.
The Dangers of Soot
The combustion process of diesel engines
creates soot. After fuel is injected, combustion occurs with
elevated soot levels as a byproduct of the process, and the
combustion particulates become trapped on the exposed oil
film. The rings wipe the particulates into the oil and the
fine particulates aggregate, increasing levels of soot in
the oil.
Oil with dispersant additives
will generally keep soot in the range of 0.002 to 0.5 microns
in suspension; detergent additives prevent the build-up of
sludge and act as an acid neutralizer, keeping soot in the
range of 0.5 to 1.5 microns in suspension. These anti-wear
additives work by providing a sacrificial chemical-to-chemical
barrier. As the amount of soot suspended in the oil increases,
the performance of these additives decreases.
Soot Causes Wear
As an oil’s soot dispersant additive
level increases, wear reducing additives become less effective.
This creates a direct linear correlation between wear and
soot concentration; the higher the concentration of soot,
the higher the level of wear. Today’s oil manufacturers
are extending oil life by holding higher concentrations of
contaminants, including soot, in suspension in the oil. They
are also increasing fuel economy by reducing oil viscosity
and oil film thickness. Therefore, even smaller sized contaminents
are becoming critical in items in terms of creating wear.
This further necessitates the use of by-pass filtration, especially
in diesel engines.
EaBP Vital Statistics
AMSOIL will continue to offer three
by-pass filters: the EaBP90, EaBP100 and EaBP110. All vehicles
and applications that can accept the AMSOIL BMK11, 12, 13,
15, 16, 17 and 18 filter mounts can use the EaBP Filters.
Per AMSOIL by-pass installation instructions, AMSOIL recommends
by-pass filters be mounted as close to vertical as possible.
The filters are equipped with an anti-drain back valve in
the event they are mounted at an angle.
Who Uses by-pass Filtration?
by-pass filtration comes standard on
all heavy-duty turbo diesel engine applications from OEMs
such as Cummins, Mack and many more. It has been available
as standard equipment or as an option from OEMs like Caterpillar,
John Deere, Case and others, but it isn’t just for heavy-duty
diesel operators. By-pass filtration is a valuable commodity
for anyone that wants to extend drain intervals and prolong
engine life. It is also beneficial to vehicles that are exposed
to high levels of contaminants on a regular basis.
AMSOIL By-pass Oil Filter Mounting
Kits
Engineered for Outstanding Oil Filtration
Efficiency.
Product Description
The AMSOIL By-Pass Oil Filter provides
the best possible filtration protection against wear, oil
degradation, rust and corrosion. Working in conjunction with
the engine’s full-flow oil filter, the AMSOIL By-Pass
Filter operates by filtering oil on a "partial-flow"
basis. It draws approximately ten percent of the oil at any
one time and traps the extremely small, wear-causing contaminants
and water that full-flow filters can’t remove. The AMSOIL
By-Pass Filter typically filters all the oil in the system
several times an hour, so the engine continuously receives
analytically clean oil.
Reduces Wear
Approximately 60 percent of all engine
wear is caused by dirt particles in the 5 to 20 micron range.
These particles can get inside the precision clearances between
engine components and cause severe damage. While full-flow
oil filters generally stop contaminants no smaller than 25
to 40 microns, the AMSOIL By-Pass Filter effectively stops
particles smaller than one micron in size, substantially reducing
engine wear.
Prevents Oil Degradation, Rust
and Corrosion
Water enters motor oil as a combustion
by-product or as a condensate. Water contamination of the
motor oil can cause extreme engine damage. Water causes metal
surface rust and corrosion, which increases friction and wear
and deteriorates the close-fitting tolerances between engine
components. In addition, water reacts with other oil contaminants
to form corrosive acids, which also damage metal components.
The AMSOIL By-Pass Filter removes water, reducing the risk
of oil degradation, engine rust and corrosion.
Extends Oil Drain Intervals
Because the AMSOIL By-Pass Oil Filter
removes water and particles down to one micron, it significantly
increases the time oil can safely be left in the engine. In
fact , engines using AMSOIL Synthetic Motor Oil and an AMSOIL
By-Pass Oil Filter routinely show much lower rates of engine
wear - even when the oil is used for significantly longer
drain intervals - than engines using conventional products
and conventional oil drain intervals. That saves motorists
time and money and helps protect the environment by creating
substantially less used oil.
Dual Remote Filter System
The AMSOIL Dual Remote Oil Filtration
System converts an engine’s full-flow oil filter system
into a full-flow/by-pass oil filtration system by attaching
an AMSOIL Full-Flow Oil Filter and AMSOIL Spin-On By-Pass
Oil Filter onto a remote mount. The Dual Remote System provides
superior filtration efficiency, increased oil capacity and
improved oil filtration accessibility.
| "When we took this Chevrolet 396
engine apart (using AMSOIL Synthetic 10W-40, Reusable
Air Filter and By-Pass Oil Filter), it was in the best
condition of any engine I have ever seen. It looked like
it had about 80,000 miles on it instead of over 535,000.
The bearings were not even worn to the brass and the rings
were not worn out. It was clean inside, no sludge or carbon
at all."
K.A., Liberal, Kansas |
NOTES:
1. Special adapters and hardware may be required
for some installations. A universal mounting bracket is included
with the kit, however, custom brackets may be required depending
on your vehicle's equipment options or personal preferences
in mounting locations.
2. Contact AMSOIL INC. Technical Service
for instructions before installing on vehicles with cast aluminum
oil pans.
Which
AMSOIL Products Are Recommended For Your Car or Truck?
| Click
Here And Enter Your Vehicle Information To Find Out
|
Click
It, Print It, and Mail It
|
Printable Dealer Application |
Mail
your completed dealer application to:
AMSOIL Inc., AMSOIL Building, Superior, WI 54880.
Register
to receive valuable WHOLESALE PRICING information and AMSOIL
product updates by email
I welcome the opportunity to
work with you personally as your servicing AMSOIL Dealer.
Use the information on this website to contact me. You may
also check out the AMSOIL
Corporate Website for product and business opportunity
information.
If you would
like more information about AMSOIL INC., click one of the
links below:
|
