To order a free catalog | Click here |

To buy AMSOIL products, visit the AMSOIL Online Store

| Buy AMSOIL at wholesale prices |

Buy AMSOIL By Phone from AMSOIL Headquarters
7am-5pm Central Time, Toll-Free at: 1-800-777-7094
Give Operator Sponsor # 504006
For Fastest Service

Why Harley-Davidson Owners Choose AMSOIL

Wear Test Comparison - AMSOIL vs. Harley Davidson Screamin' Eagle Syn3 Synthetic Motorcycle Oil

The recent introduction of Screamin' Eagle® Synthetic Lubricant by Harley-Davidson® indicates the Motor Company has finally recognized the benefits of running synthetic motorcycle oil in their air-cooled engines. After years of advising dealers and customers to avoid using synthetic oils in their bikes, it's natural to wonder why the company is suddenly marketing one.

For the past 20 years, Harley-Davidson® has claimed its petroleum-based Genuine H-D Oil is best for the "unique requirements of Harley-Davidson® air-cooled V-twin engines." However, laboratory testing has consistently revealed that Genuine H-D Oil does not provide the best protection possible for Harley-Davidson® engines. In fact, Four-Ball Wear Tests show Harley- Davidson® 20W-50 Motorcycle Oil leaves a wear scar nearly 80 percent larger than that left by AMSOIL Synthetic 20W-50 Motorcycle Oil.

The Four-Ball Wear Test is the industry's standard test method for measuring the wear preventive characteristics of a lubricant. Placed in a bath of the test lubricant, three fixed steel balls are put into contact with a fourth ball in rotating contact at preset test conditions. Lubricant wear protection properties are measured by comparing the average wear scars on the three fixed balls. The smaller the average wear scar, the better the protection.

Four-Ball Wear Test (ASTM D4172), 40kg pressure @ 150 degrees C, 1800 rpm for 1 hour duration April 2003 test results

One of the major benefits of running a synthetic motorcycle oil is its resistance to oxidation and thermal degradation, which inhibit the formation of sludge and deposits that contribute to increased wear. In the past, Harley-Davidson® has defended use of its Genuine H-D Oil by arguing that oil breakdown in extreme heat is a non-issue because extreme heat conditions are not normally faced by motorcycle engines, while the superior cold-temperature benefits of synthetics also don't apply to Harleys.

The fact is, engine oil in Harley-Davidson® motorcycles is subject to very high temperatures. Being air-cooled, Harley-Davidson® engines get especially hot while idling in traffic, commonly reaching temperatures up to 240 degrees Fahrenheit. As heat and oxidation increase, so does viscosity, adversely affecting the lubricating qualities of the oil and increasing wear.

The water, soot and acid byproducts of combustion also contribute to deposit formation. Harley-Davidson® has stressed the importance of regular oil changes in order to remove these contaminants. Of course, promoting regular oil changes is also a good way to promote using petroleum-based Genuine H-D Oil. High-quality synthetic oils formulated with high-performance additives effectively withstand such contaminants, allowing motorcyclists to safely extend drain intervals.

In support of their about-face and the introduction of a synthetic oil, Harley maintains that "the Motor Company has never supported the use of synthetic products in our vehicles because there has never been any test validations completed on the numerous formulations in HD/Buell motorcycles. This product has been exclusively designed for Harley-Davidson® and is the only synthetic product TESTED and CERTIFIED by Harley-Davidson® engineering for use in HD/Buell motorcycles."

Although this is necessary marketing hype, Harley-Davidson® V-twin air-cooled engines are not unique in their lubrication requirements and do not require a special Harley-only fluid (see letter from Harley-Davidson). There is nothing about Screamin' Eagle® Synthetic Motorcycle Oil that sets it apart from, or makes it better than, many other synthetic motorcycle oil formulations, except that Harley-Davidson® is marketing it and directly profiting from the sales.

According to Harley-Davidson®, one of the unique benefits offered by Screamin' Eagle® Synthetic Motorcycle Oil is its versatility. For the first time the company is recommending an oil that can be used in the engines, primary chaincases and transmissions of most Harley-Davidson® motorcycles, including Evolution XL, Evolution 1340, Twin Cam 88 and 88B, Revolution and Buell models. This feature, however, is not unique. AMSOIL 20W-50 Synthetic Motorcycle Oil may also be used in the engines, primary chaincases and transmissions of these applications, providing superior lubricating protection in each component.

How does Screamin' Eagle® Synthetic Motorcycle Oil measure up to AMSOIL in wear protection? Four-Ball Wear Test results indicate that AMSOIL Synthetic Motorcycle Oil still provides the best protection possible for motorcycles. In fact, Screamin' Eagle® Synthetic Motorcycle Oil leaves a wear scar nearly 80 percent larger than AMSOIL 20W-50 Synthetic Motorcycle Oil.

Not only does AMSOIL Synthetic Motorcycle Oil offer greater wear protection than Screamin' Eagle® Synthetic Motorcycle Oil, it also delivers greater value. And because AMSOIL Synthetic Motorcycle Oil may be used for extended drain intervals of up to twice the manufacturer's suggested interval, while Screamin' Eagle® is recommended for standard drain intervals, AMSOIL customers realize additional savings.

Harley-Davidson® claims Screamin' Eagle® Synthetic Motorcycle Oil has been "exclusively designed" for use in their motorcycles, pointing to extensive bench testing and over 230,000 miles of durability testing to back it up. AMSOIL INC. has over 35 years of experience providing superior lubricating protection for all brands of motorcycles, and AMSOIL Synthetic Motorcycle Oils have been tested in millions of over-the-road miles. Testimonials from countless motorcyclists further demonstrate the superiority of AMSOIL Synthetic Motorcycle Oils.

Formulated with top-of-the-line synthetic base stocks and high-temperature deposit control additives, AMSOIL Synthetic Motorcycle Oils provide superior protection and performance for motorcycles in all operating conditions. AMSOIL Motorcycle Oils effectively withstand oxidation and thermal degradation, keep wear to an absolute minimum, hold contaminants in suspension and keep engines running cool and clean.

AMSOIL Synthetic Motorcycle Oils

• Reduce operating temperatures
• Keep engines clean and deposit-free
• Provide maximum protection against wear
• Formulated without friction modifiers for smooth performance
• Saves money with extended drain intervals of up to two times the manufacturers' recommendations

| AMSOIL Synthetic Motorcycle Oils |

| AMSOIL Motorcycle Oil Filters |

| AMSOIL Motorcycle Air Filters |

Articles

Testimonials

Motorcycle Testimonials

Business Opportunity Testimonials

From The Presidents Desk

AMSOIL Synthetic Diesel Oil Articles and Testimonials

Premium AMSOIL Synthetic Motor Oils offer the longest drain intervals on the market, unsurpassed protection and performance that effectively extends equipment life and improved fuel economy, saving customers money at the pump and reducing the nation’s dependence on foreign oil.

"AMSOIL INC. warrants that the use of its lubricants will not cause mechanical damage to any mechanically sound equipment when AMSOIL INC. products are used in full compliance with the company's recommendations and instructions."

FULL WARRANTY

AMSOIL synthetic motor oils are formulated to surpass engine test specifications, offering protection far greater than competing motor oils for extended drain intervals. Most synthetic oil manufacturers make no claim to extended drain intervals, deferring to the maintenance schedule provided by the vehicle manufacturer. With its unparalleled oil and warranty program, AMSOIL offers consumers unprecedented protection and economics.

Another AMSOIL First

More than 20 years ago, AMSOIL began using the NOACK volatility test as a comparison tool and measurement of quality. Back then, nearly every oil tested side-by-side with AMSOIL synthetic motor oils failed, and those that passed barely squeaked by. Other oil companies paid no attention to NOACK results until Ford Motor Company made it a requirement for service fill oils, validating what AMSOIL had said all along.

AMSOIL Now An ISO Certified Manufacturer
AMSOIL recently received ISO 9001:2000 certification of our Quality Management System (QMS). NSF International Strategic Registrations is the registrar that has verified our QMS meets the requirements of the ISO 9001:2000 standard, the most widely utilized quality standard throughout the world for quality management systems. ISO standards are used by over 300,000 companies worldwide setting rigorous standards for businesses, government and industry.

ISO 9001:2000 is applicable to any manufacturing and service organization providing a framework for system development that focuses on the customer, quality system performance and ongoing improvement. AMSOIL received ISO 9001:2000 registration under the scope: synthetic lubricants blending, packaging, and other fulfillment directly associated with lubricant product.

The ISO certification puts AMSOIL in line with some of the most efficient companies in the world. It is further assurance that the products and services AMSOIL provides will continue to maintain the high level of quality the company always demanded.

Which AMSOIL Products Are Recommended For Your Car or Truck?
| Click Here And Enter Your Vehicle Information To Find Out |

Click It, Print It, and Mail It

| Printable Dealer Application |

Mail your completed dealer application to:
AMSOIL Inc., AMSOIL Building, Superior, WI 54880.

Register to receive valuable WHOLESALE PRICING information and AMSOIL product updates by email

I welcome the opportunity to work with you personally as your servicing AMSOIL Dealer. Use the information on this website to contact me. You may also check out the AMSOIL Corporate Website for product and business opportunity information.

If you would like more information about AMSOIL INC., click one of the links below:

• To Request a Free Product Catalog

• For information On Becoming a Dealer

• AMSOIL Online Product Application Guide

• To Buy AMSOIL Products in the AMSOIL Online Store

• To Sell AMSOIL in Your Store or Purchase For Use In Your Equipment