Customer Enjoys Increased Gasoline Mileage With AMSOIL Motor Oils

Mike Dickerson at home in Warsaw, Kentucky. Disckerson gained impressive gas mileage in his 1993 Chevy Suburban after he switched to AMSOIL motor oil.

He was driving his 1993 Chevy Suburban, with 366,000 miles – 85,000 on the drivetrain. He gave it a tune-up and installed AMSOIL 5W-30 Synthetic Motor Oil and a WIX 51060 oil filter. The two-wheel drive half-ton truck is powered by a basic 350 engine, and its normal average is 15.5 miles per gallon “on the open road with cruise set between 70 and 75 miles per hour, and not towing,” Dickerson said.

The trip to Nebraska and back totaled more than 2,500 miles, and Dickerson kept track of the mileage throughout the trip.

The first tank averaged 17.1 mpg. “I didn’t believe it at first, so I double-checked. The math still worked,” Dickerson said. “I figured it was a fluke and the next few tanks would prove this as an anomaly.”

However, the next tank was filled after 444 miles of combined interstate and in-town driving and the truck saw 14.8 mpg. “It normally gets around 14 mpg under these conditions,” Dickerson said.

The next tank fill was with nearly 40 gallons of E85 ethanol fuel. “At 523 miles of 100 percent interstate driving speeds of 70 to 75 mph the gas mileage was 15.8,” said Dickerson. “I attributed this to the well known loss of efficiency from ethanol based fuels and some inconsistent speeds, but is still much higher than I have ever experienced with this truck.

“The most significant change was the switch to AMSOIL motor oil after years of running petroleum oil. The fuel savings more than make up for the added cost of AMSOIL, and the longer change intervals mean I don’t have to change my oil after a 2,500-mole sojourn like we just made.

“At the current cost of petroleum oils, you will pay for three petroleum oil changes what you pay for one AMSOIL change. In this economy, or any economy, you simply can’t ignore these savings, in addition to the environmental sensibilities of using AMSOIL synthetic lubricants.”

Premium AMSOIL Synthetic Motor Oils offer the longest drain intervals on the market, unsurpassed protection and performance that effectively extends equipment life and improved fuel economy, saving customers money at the pump and reducing the nation’s dependence on foreign oil.

"AMSOIL INC. warrants that the use of its lubricants will not cause mechanical damage to any mechanically sound equipment when AMSOIL INC. products are used in full compliance with the company's recommendations and instructions."

FULL WARRANTY

AMSOIL synthetic motor oils are formulated to surpass engine test specifications, offering protection far greater than competing motor oils for extended drain intervals. Most synthetic oil manufacturers make no claim to extended drain intervals, deferring to the maintenance schedule provided by the vehicle manufacturer. With its unparalleled oil and warranty program, AMSOIL offers consumers unprecedented protection and economics.

Another AMSOIL First

More than 20 years ago, AMSOIL began using the NOACK volatility test as a comparison tool and measurement of quality. Back then, nearly every oil tested side-by-side with AMSOIL synthetic motor oils failed, and those that passed barely squeaked by. Other oil companies paid no attention to NOACK results until Ford Motor Company made it a requirement for service fill oils, validating what AMSOIL had said all along.

THE NOACK Volatility Test
The NOACK Volatility Test determines the evaporation loss of lubricants in high temperature service. The more motor oils vaporize, the thicker and heavier they become, contributing to poor circulation, reduced fuel economy and increased oil consumption, wear and emissions. AMSOIL Synthetic Motor Oil resists high temperature volatization better than other motor oils. AMSOIL Synthetic Motor Oil maintains peak fuel efficiency and reduces oil consumption and emissions.

AMSOIL Now An ISO Certified Manufacturer
AMSOIL recently received ISO 9001:2000 certification of our Quality Management System (QMS). NSF International Strategic Registrations is the registrar that has verified our QMS meets the requirements of the ISO 9001:2000 standard, the most widely utilized quality standard throughout the world for quality management systems. ISO standards are used by over 300,000 companies worldwide setting rigorous standards for businesses, government and industry.

ISO 9001:2000 is applicable to any manufacturing and service organization providing a framework for system development that focuses on the customer, quality system performance and ongoing improvement. AMSOIL received ISO 9001:2000 registration under the scope: synthetic lubricants blending, packaging, and other fulfillment directly associated with lubricant product.

The ISO certification puts AMSOIL in line with some of the most efficient companies in the world. It is further assurance that the products and services AMSOIL provides will continue to maintain the high level of quality the company always demanded.

Which AMSOIL Products Are Recommended For Your Car or Truck?
| Click Here And Enter Your Vehicle Information To Find Out |

What Drain Interval Does AMSOIL Recommended For Your Vehicle?
| Click Here For The AMSOIL Recommended Drain Interval Chart |

Click It, Print It, and Mail It

| Printable Dealer Application |

Mail your completed dealer application to:
AMSOIL Inc., AMSOIL Building, Superior, WI 54880.

I welcome the opportunity to work with you personally as your servicing AMSOIL Dealer. Use the information on this website to contact me. You may also check out the AMSOIL Corporate Website for product and business opportunity information.

If you would like more information about AMSOIL INC., click one of the links below:

To Request a Free Product Catalog

For information On Becoming a Dealer

AMSOIL Online Product Application Guide

To Buy AMSOIL Products in the AMSOIL Online Store

To Sell AMSOIL in Your Store or Purchase For Use In Your Equipment

Close [X]